Boston Acoustics SL60

I took a pair of Boston Acoustics SL60 6.5 "2 components is about a month ago to replace my 5x7 Infinity Reference comps. Install was pretty easy, but the flush-mount tweeter cups a twisting under PITA tweets (had to take the peak in the tweeter in my hands!) and X-overs have small terminal hardware. Put them in mdf adapters 1 / 2 "to get the 6.5s in place in the fabric of my Tacoma 5x7 P / U. The tweets are embedded in the location of the plant on top of the door. I have a single layer of CA resulted in sound-absorbing rubber for the doors of my dream, does not change anything about my half-ass fatal work when I changed the speakers. To run in an RF amplifier of age is estimated at 100x2 at 4 ohms, 80 Hz x-over to my deputy.

The sound is another world compared to my old Infinity! Much better mid-bass, the mids are much more clear, clean and high sound real. Tweeters are pretty bright. I installed the attenuation 0 dB,-2dB cut, then cut back to -4 dB, -4 is where they stay for now, although I can see again when I get a HU 2dB over a 3-band equalizer . Clarity, volume, and "listenability" is very good, I find myself listening to a volume of 2.3 to 3.4 hours when on the road, with the infinite, I am writing a song, but then right down sometimes before a song had ended. Sirius Sat radio broadcast quality is now the weakest link of the CS on my system, I could barely hear the difference of the squares of a CD radio with Infinity session with SL60 difference is huge.

Reference article. LoudSpeaker Caraudio

Similar article. LoudSpeaker Car Audio